You have finished your edit, the story works and the colour looks right. Then you upload it, and YouTube shows a blurry, blocky or out-of-sync version of your video. Very often the problem is not the edit but the export: the settings used to turn your timeline into a single video file.
This guide explains the export settings that matter for YouTube, what YouTube itself recommends, step-by-step export in two common editors, a quick way to estimate file size and an illustrative export sheet you can reuse.
Why export settings matter
YouTube re-encodes every video you upload into several versions for different screens and internet speeds. That means the file you upload is the master copy everything else is made from. If your upload is low quality, every version viewers see will be worse. If it is sensibly encoded, YouTube has good material to work with.
The good news: you do not need to understand every technical term. A handful of settings make most of the difference.
What YouTube recommends
YouTube publishes its recommended upload encoding settings. The key points for most creators are:
- Container: MP4.
- Video codec: H.264, progressive scan (not interlaced).
- Audio codec: AAC-LC (YouTube also lists other options).
- Frame rate: the same frame rate the video was recorded in.
- Bitrate: variable bitrate, with recommended targets by resolution.
- Aspect ratio: 16:9 is standard on computers; the player adapts to vertical or square videos.
Recommended video bitrates (SDR)
These are the figures YouTube lists for standard dynamic range uploads at the time of writing. Check the page before you export, as recommendations can change.
- 720p: 5 Mbps at 24, 25 or 30 fps; 7.5 Mbps at 48, 50 or 60 fps.
- 1080p: 8 Mbps at 24, 25 or 30 fps; 12 Mbps at 48, 50 or 60 fps.
- 1440p (2K): 16 Mbps; 24 Mbps at high frame rates.
- 2160p (4K): 35 to 45 Mbps; 53 to 68 Mbps at high frame rates.
For audio, the same page recommends 384 kbps for stereo and 128 kbps for mono.
The settings, one by one
Resolution
Export at the resolution of your timeline, which should usually match your main camera. If you shot in 4K but edited on a 1080p timeline, export 1080p. Upscaling a smaller video to 4K does not add detail.
Frame rate
Keep the frame rate you shot and edited in, such as 25 fps or 30 fps. Changing it at export can cause stutter. If you mixed frame rates, decide one project frame rate before editing, not at the end.
Codec and container
Choose H.264 in an MP4 file. It is widely supported and matches YouTube’s recommendation. Some editors call this “H.264” in the format menu, others list “MP4” as the format and “H.264” as the codec.
Bitrate
Bitrate is how much data is used per second of video. Too low and you get blocky images, especially in dark scenes or fast movement. Choose variable bitrate (VBR) and set a target close to YouTube’s recommendation for your resolution and frame rate.
Audio
Choose AAC, 48 kHz, stereo, with a bitrate around 384 kbps. Before exporting, play the whole video through headphones and speakers to check that voices are clear and music is not too loud.
Colour
If you graded your video, export in the standard colour space your editor uses for web delivery (usually Rec. 709 for standard dynamic range). Avoid special HDR settings unless you shot and graded in HDR deliberately.
Step by step: exporting in two editors
DaVinci Resolve
- Open the Deliver page.
- Choose the YouTube preset in Render Settings as a starting point, or select a custom export.
- Set Format to MP4 and Codec to H.264.
- Check that resolution and frame rate match your timeline.
- Set the quality or bitrate close to YouTube’s recommendation.
- Set audio to AAC.
- Choose a file name and location, click Add to Render Queue, then Render All.
New to Resolve? Our guide to DaVinci Resolve for beginners covers the pages and a simple editing workflow.
Premiere Pro
- With your sequence selected, open Export.
- Choose H.264 as the format. A YouTube or “high bitrate” preset is a useful starting point.
- Check that resolution and frame rate match your sequence.
- Under Video, choose variable bitrate and set the target bitrate.
- Under Audio, choose AAC, 48 kHz, stereo.
- Name the file and click Export.
For the full editing workflow, see how to use Premiere Pro.
Estimate your file size before you export
File size is roughly bitrate multiplied by duration. Bitrates are given in megabits per second, and there are 8 bits in a byte, so:
File size in MB ≈ (video bitrate + audio bitrate in Mbps) × duration in seconds ÷ 8
This helps you plan upload time on a slow connection and check that your settings are sensible. A file far smaller than expected often means the bitrate was set too low.
Illustrative export sheet: a 12-minute tutorial
This example is illustrative. A creator has edited a 12-minute cooking tutorial on a 1080p, 25 fps timeline.
- Format and codec: MP4, H.264, variable bitrate.
- Resolution: 1920 × 1080.
- Frame rate: 25 fps, matching the camera and timeline.
- Video bitrate: 8 Mbps, YouTube’s 1080p standard frame rate recommendation.
- Audio: AAC, 48 kHz, stereo, 384 kbps.
- Estimated size: (8 + 0.384) × 720 seconds ÷ 8 ≈ 755 MB.
- Checks after export: watched the first minute, a middle section and the ending in a media player; sound in sync; no black frames at the end.
- Extras: a separate subtitle file and a custom thumbnail prepared for upload.
Exporting YouTube Shorts
For Shorts, edit on a vertical (9:16) or square timeline. YouTube’s guide to uploading YouTube Shorts says a Short should be up to three minutes long with a square or vertical aspect ratio. Use the same codec, frame rate and audio settings as for regular videos, with a 1080 × 1920 resolution and the matching 1080p bitrate.
Before you upload: a final checklist
- Watch the exported file, not just the timeline.
- Check the first and last frames for flashes or black gaps.
- Confirm sound is in sync at the start, middle and end.
- Prepare captions. Our guide on how to add subtitles to videos explains how to make a subtitle file.
- Design a clear thumbnail with our guide on how to make YouTube thumbnails.
- Keep the exported master file and the project in your backup.
Common mistakes to avoid
- Exporting at a very low bitrate to make the file small.
- Changing frame rate at export, which can cause stutter.
- Uploading a 4K file made from a 1080p timeline, which adds size, not detail.
- Skipping the final watch-through of the exported file.
Learn editing skills with Karuna Media
Karuna Media, an initiative of Puppets Picture Education Trust (PPET) in Noida, trains women from underprivileged backgrounds in media, filmmaking and AI skills through the Karuna Media Master Program, so they can build portfolios for creative careers.
- Want to learn? Read about the program and apply here.
- Want to help more women tell their stories? Support our work through the donate page.
Your next step
Export the same one-minute section of your current project twice: once at 2 Mbps and once at YouTube’s recommended bitrate. Upload both as unlisted videos, wait for processing and compare them full screen. The difference will show you why export settings matter.
The Giving Movement by Karuna Media · #TheGivingMovement
Wear the cause: tees, a tote and a mug that fund media training for women
Tee (Black) ₹699 · Tee (White) ₹649 · Tote ₹449 · Mug ₹399. Printed on demand and shipped across India. 100% of the profit funds media training for underprivileged women.
Buy now on Razorpay Prefer to donate? Go to our donate pageMerch is a purchase, not a donation, and is not eligible for 80G. To make a donation, use our donate page.
