If you record sound on a separate recorder or a phone while your camera records video, you end up with two files that do not know about each other. Before you can edit, you have to line them up so lips move exactly with words. This is called syncing, and filmmakers call the method of recording sound separately “dual-system” or “double-system” sound.
This guide explains why separate audio is worth the effort, how to prepare on set so syncing is easy, three ways to sync in editing software and an illustrative checklist you can use on your next shoot.
Why record audio separately?
Built-in camera microphones are usually far from the speaker and pick up room echo and handling noise. A lavalier or shotgun microphone connected to a dedicated recorder, or a phone in the presenter’s pocket, gives much cleaner sound. Our guide on how to choose a microphone for video explains which microphone suits which kind of shoot.
The trade-off is that you now have two recordings to combine. With good habits on set, syncing takes seconds per clip.
Prepare on set: make syncing easy
Always record scratch audio on the camera
Even if you will never use it, keep the camera’s own microphone on. This “scratch” track gives editing software a waveform to compare with your clean recording. Without it, automatic waveform syncing has nothing to match.
Mark every take with a clap
At the start of each take, use a clapperboard or simply clap your hands once, sharply, in view of the camera. The visual moment when the hands meet and the sharp spike in both audio files give you a precise sync point. If you forget at the start, an end clap (held upside down, by convention) works too.
Use matching settings
- Sample rate: record audio at 48 kHz, the usual standard for video, so you avoid conversion issues in the edit.
- Frame rate: keep it consistent across cameras on the same project. Where possible, use a constant frame rate; phone videos recorded at a variable frame rate are a common cause of sound slowly drifting out of sync.
- Long takes: separate devices keep time with their own internal clocks, which can differ very slightly. Over a long recording, this can add up to a visible drift, so stop and restart with a fresh clap every so often.
Name and log takes
Say the scene and take number aloud before the clap, for example “Scene 4, take 2, mark”. Log it on paper too. When you have dozens of files, this is how you find matching pairs.
Consider timecode on bigger shoots
Professional recorders and cameras can share the same timecode, a running clock of hours, minutes, seconds and frames. When devices are jam-synced to the same timecode, software can match clips almost instantly. For beginners and small crews, a clap plus scratch audio is usually enough.
Three ways to sync in editing software
Method 1: sync by waveform automatically
Most editing programs can compare the scratch track with your clean recording and line them up.
- DaVinci Resolve: select the matching video and audio clips in the Media Pool, right-click and choose Auto Sync Audio, then pick the waveform option. Blackmagic Design’s overview of the Resolve media page notes that you can sync by timecode or by audio waveforms without rendering new media.
- Premiere Pro: select the clips and use Merge Clips or Synchronize, choosing audio as the sync point. Adobe’s help page on synchronizing audio and video explains that Merge Clips can sync a video clip with up to 16 audio channels and does not alter the source clips.
New to these programs? Start with our guides to DaVinci Resolve for beginners and how to use Premiere Pro.
Method 2: sync by the clap manually
If automatic sync fails, for example because the scratch audio is too noisy, do it by hand:
- Place the video clip and the separate audio clip on the timeline on different tracks.
- Zoom in on the video and find the exact frame where the hands or clapper close.
- Find the sharp spike in the separate audio waveform.
- Slide the audio until the spike lines up with that frame. Check the scratch track’s spike lines up too.
- Play back and watch the lips. Nudge one frame at a time if needed.
- Link the clips so they move together, and mute or delete the scratch track.
Method 3: sync by timecode
If your camera and recorder shared timecode, choose the timecode option in the same sync menus. It is fast, but always spot-check: matching numbers only help if the devices really were synchronised on set.
Illustrative example: syncing an interview
This example is illustrative. Priya films a 20-minute interview as one continuous take on a mirrorless camera, with a lavalier microphone plugged into a phone recording app at 48 kHz. She claps once at the start.
- In the edit: she imports both files into DaVinci Resolve, selects them and runs Auto Sync Audio by waveform. The clips merge in a few seconds.
- Check 1: at the start, the clap spike and the hands meeting line up.
- Check 2: she jumps to minute 10 and minute 19 and watches the lips on hard consonants like “p” and “b”. At minute 19 the audio is two frames late.
- Diagnosis: the camera and phone clocks ran at very slightly different speeds, and over 20 minutes the difference became visible.
- Fix: she cuts the clip at a natural pause around minute 10 and re-aligns the second half by hand, matching a hard consonant in the scratch track. Next time she will clap again every ten minutes or so.
The lesson: always check the beginning, middle and end of long clips, not just the start.
Troubleshooting common problems
- Auto sync fails: the scratch audio may be missing, too quiet or too noisy. Sync manually using the clap.
- Sound is slightly off throughout: you may have lined up the wrong spike. Look for the clap, not a door slam.
- Sync drifts over time: check frame rate and sample rate settings, convert variable frame rate phone footage if your editor recommends it, and split long recordings into shorter takes.
- Echo-like doubling: the scratch track is still playing under the clean audio. Mute it.
- Too many files to match: organise by day and scene before syncing, so the software compares fewer clips at once.
Quick on-set checklist
- Camera scratch audio on.
- Recorder set to 48 kHz, levels tested.
- Both devices recording before the clap.
- Say scene and take, then clap once, clearly in frame.
- Log the file names.
- Back up both cards together at the end of the day.
Clear audio starts at the source, so our guide on how to record clear audio on a phone is a good companion to this one.
Learn editing and audio skills with Karuna Media
Karuna Media, an initiative of Puppets Picture Education Trust (PPET) in Noida, trains women from underprivileged backgrounds in media, filmmaking and AI skills through the Karuna Media Master Program, so they can build portfolios for creative careers.
- Want to learn? Read about the program and apply here.
- Want to help more women tell their stories? Support our work through the donate page.
Your next step
Record a two-minute conversation with a friend: camera audio on, a phone recording sound close to their mouth, and one clap at the start. Sync it automatically, then sync it again by hand using the clap. Compare the results at the end of the clip to see how accurate each method is.
The Giving Movement by Karuna Media · #TheGivingMovement
Wear the cause: tees, a tote and a mug that fund media training for women
Tee (Black) ₹699 · Tee (White) ₹649 · Tote ₹449 · Mug ₹399. Printed on demand and shipped across India. 100% of the profit funds media training for underprivileged women.
Buy now on Razorpay Prefer to donate? Go to our donate pageMerch is a purchase, not a donation, and is not eligible for 80G. To make a donation, use our donate page.
